Table of Contents
Advertisement
5.2.4 Setting up AirPort configuration
The AirPort function enables the sharing of files between a Macintosh computer
and a Windows computer. In order to enable this file sharing you must have the
DAVE software and the AirPort software installed on the Macintosh computer.
To configure the AirMac function, follow these steps.
1 Open the Basic Settings screen. For instructions on how to do this, see
2 Ensure that the Encryption Code (WEP) field is empty.
3 Ensure that a channel between 1 and 13 is displayed in the DS Channel field.
4 Note the AirStation ESS-ID, which is displayed in the ESS-ID field.
5 Start up the AirPort-enabled Macintosh computer.
6 Select Apple Menu, AirPort.
7 Select the AirStation ESS-ID that you noted earlier from the Choose network
Figure 45: AirPort configuration tool
"Displaying the Settings screen" on page 43.
If using the AirStation Pro in the USA, select a channel between 1 and 11.
The AirPort configuration tool is displayed.
drop-down list.
Once you have done this, the AirStation Pro can communicate with the
Macintosh computer.
Configuring AirStation Settings 48
WLA-AWCG User Manual
Advertisement
Table of Contents
