Table of Contents
Advertisement
Cause 7:
The network setting is incorrect.
Solutions:
Ensure that the Protocol, Workgroup Name and Share settings are correct.
6.2.7 Search is taking a long time to display other computers.
Cause 1:
The other computer is not connected to the network.
If your computer cannot access that computer, this may be because the registry
is displaying a "ghost entry". This means that the requested computer is not
actually connected to the network, but the registry has not updated since that
computer was disconnected.
Solutions:
To check this, you must do the following:
1 On the Start menu, select Find, Computers.
2 Enter the name of the computer you want to search for.
3 Click Search.
4 Double-click the computer icon when the search is complete.
To check the protocols, refer to the
"Checking the TCP/IP settings" on page
To check the Workgroup Name, go to your Network Neighbourhood
properties and select the Identification tab.
To check the Share settings, go to the properties of your hard drive and select
the Sharing tab.
AirStation Pro Installation chapter,
31.
Troubleshooting 68
WLA-AWCG User Manual
Advertisement
Table of Contents
