4.2.3 Installing the AirStation Manager Software
For security reasons the AirStation Manager software will only normally be
installed on the configuration PC. This means that only an administrator has access
to configure the AirStation Manager settings. To install the AirStation Manager, on
the configuration PC, follow these steps:
1 Insert the AirStation Series Driver CD into the CD-ROM drive. If the Simple
Note: You should close all applications before beginning the installation process.
2 On the Start menu, select Run.
Figure 26: Run dialog box
3 Enter d:\wleasy.exe (where d represents the CD-ROM drive) in the Open:
4 Click OK.
Figure 27: Simple Installation Wizard dialog box
33 AirStation Pro Installation
WLA-AWCG User Manual
Installation Wizard dialog box is displayed, proceed directly to step 5.
The Run dialog box is displayed.
field.
The Simple Installation Wizard dialog box is displayed.