Buffalo AirStation Pro WLA-AWCG User Manual page 66

Solutions:
To correct this:
1 Ensure that the network adapter is installed in the computer.
2 If the network adapter still cannot be found, remove the adapter and then re-
Cause 2:
The network adapter drivers have not been installed.
Solutions:
Ensure that the correct drivers for the network adapter are correctly installed.
If you are using the Wireless LAN card, refer to the Wireless LAN Card WLI-PCM L11
User's Manual for information. If you are using any other type of network adapter,
refer to the appropriate adapter documentation.
Cause 3:
Network adapter is configured incorrectly.
The network adapter may not be configured to meet the AirStation Pro
requirements.
Solutions:
63 Troubleshooting
WLA-AWCG User Manual
For instructions on how to do this, refer to the
chapter, "Network adapter installation" on page
install it. Refer to your Windows documentation for instructions on how to do
this.
Check the following items and re-install the network adapter again. See also
the AirStation Pro Installation chapter, "Network adapter installation" on
page 29.
AirStation Pro Installation
29.