A.4.2 Adding protocols
If you need to add protocols, follow the steps appropriate to the Windows version
that you are using:
Windows 95/98/ME
1 Open the Network - Configuration dialog box as shown in
2 Click Add.
Figure 56: Select Network Component Type dialog box
3 Select Protocol and click Add.
Figure 57: Select Network Protocol dialog box
4 Select Microsoft from the Manufacturers panel.
75 Appendix
WLA-AWCG User Manual
protocols are added" on page
The Select Network Component Type dialog box is displayed.
The Select Network Protocol dialog box is displayed.
72.
"Checking that the