Table of Contents
Advertisement
The Routing Setup screen is displayed.
Figure 48: Routing Setup screen
3 Set the IP address of the default gateway IP in the Default Gateway address
field.
If there is no default gateway, leave the Default Gateway address field blank
and click Set.
Note: If you have a DHCP server on your network, a default gateway address will
be automatically assigned. This can be over-ridden by manually entering
an IP address in the Default Gateway address field. It is recommended
that you manually set a gateway address.
If you wish to create a routing table for routers that exist on the network,
you must enter values in the Add Routing Table Entry.
1 Enter the destination IP address in the Destination Address field.
2 Enter the IP address for the gateway in the Gateway field.
3 Enter the total number of routers to be passed in the Metric field. You must
enter a value in the range of 1 - 15.
Configuring AirStation Settings 54
WLA-AWCG User Manual
Advertisement
Table of Contents
