Advertisement
Installing the Mounting End Caps
1. INSTALL Hinge End Mounting End Cap on hinge
side of door using two (2) #8-32 x 3/8" tri lobe
pan head screws.
Maintenance
1. CHECK mounting fasteners periodically and TIGHTEN if loose.
2. APPLY screw locking compound or CHANGE part fasteners if screws continue to back out.
3. PERFORM periodic and required checks and adjustments of strikes to compensate for wear and tear
such as door sagging.
Warranty
For complete warranty information, please visit the Adams Rite website:
http://www.adamsrite.com/en/site/adamsritecom/about/warranty/
2. INSTALL Latch End Mounting End Cap on
latch side of door using two (2) #8-32 x 3/8"
tri lobe pan head screws.
P
E
techsupport.adamsrite@assaabloy.com
Page | 10
800.872.3267
F
800.232.7329
www.adamsrite.com
Advertisement
