Table of Contents
Advertisement
Quick Links
BT8706
PREMIUM FREESTANDING
SINGLE SCREEN UC STAND
INSTALLATION GUIDE
SPECIFICATIONS
• Recommended for screens up to: 70" (177cm)
• Max load: 70kg (154lbs)
• Suitable for displays with fixings up to 672 x 400mm
• Stand dimensions: H.1945 x W.828 x D.756mm
• Universal design suitable for displaying screens
in a landscape or portrait orientation
• Integrated cable management
www.btechavmounts.com
Advertisement
Table of Contents
Related Manuals for B-Tech BT8706
Summary of Contents for B-Tech BT8706
- Page 1 BT8706 PREMIUM FREESTANDING SINGLE SCREEN UC STAND INSTALLATION GUIDE SPECIFICATIONS • Recommended for screens up to: 70" (177cm) • Max load: 70kg (154lbs) • Suitable for displays with fixings up to 672 x 400mm • Stand dimensions: H.1945 x W.828 x D.756mm •...
-
Page 2: Installation Safety Instructions
Please check carefully to make sure there are no missing or defective parts - defective parts must never be used. B-Tech AV Mounts, its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions. In such cases, all guarantees will expire. - Page 4 BT8706 PARTS LIST PLEASE KEEP THIS FOR FUTURE REFERENCE...
-
Page 5: Mounting Rail
ITEM PART DESCRIPTION 1.9M COLUMN END CAP COLUMN REAR COVER M6 x 12mm HEX SCREW M6 x 12mm GRUB SCREW (OPTIONAL) SQUARE NUT (OPTIONAL) COVER STRIP 3AF HEX KEY 4AF HEX KEY BASE ADJUSTABLE LEVELLING FEET M6 x 30mm CSK HEX SCREW 4AF HEX KEY 19mm SPANNER RAIL-TO-COLUMN MOUNTING BRACKET... - Page 6 Installation Instructions FIX FEET TO BASE Attach item B2 to the bottom of item B1. OPTIONAL - FIX REAR COVER TO COLUMN Place item A3 into the back of item A1. M6 x 12mm SQUARE Use items A5 & A6 at the top and bottom of the GRUB SCREW column slot to secure rear cover.
- Page 7 OPTIONAL: To level the stand, ATTACH COLUMN TO BASE adjust item B2 using item B5. Fix item A1 to the top of item B1 using item B3. M6 x 30mm CSK HEX SCREW ATTACH MOUNTING BRACKET TO COLUMN i. Insert 4 x item C2 into item C1 and attach item C3. Screw two full turns to leave item C3 at the end of item C2.
- Page 8 HOOK RAIL ONTO MOUNTING BRACKET i. Insert 4 x item C4 into item D1 (2 in the top channel, 2 in the bottom channel). ii. Screw 2 x item C5 into item C4 in the top channel - allow at least a 6mm gap M8 x 12mm M8 SLIDING so the rail can be hooked on to item C1.
- Page 9 FIX END CAP TO COLUMN Fix item A2 onto the top of item A1 using item A4. M6 x 12mm HEX SCREW ATTACH INTERFACE ARMS TO SCREEN Fix item E1 to the rear of the screen using items E3 - E15. Note: Ensure the arms are facing the correct way round and the same holes are used on both arms.
- Page 10 HOOK SCREEN ONTO RAIL LOCK SCREEN TO RAIL Use items E1 to hook the screen Tighten the safety screws on the bottom onto item D1. of item E1 securing the screen to item D1. Note: If necessary, adjust the height adjustment screws on top of item E1 to level the screen.
-
Page 11: Front View
SIDE VIEW 79.5mm 180mm 8.4mm 60.8mm BOTTOM VIEW 828mm TOP VIEW 727.8mm 705mm 40mm 70mm 669mm 777.1mm These instructions are intended as a guide only and B-Tech accepts no liability for the accuracy of the information contained in this document. - Page 12 ©2020 B-Tech AV Mounts. All rights reserved. B-Tech AV Mounts is a division of B-Tech International Design and Manufacturing Ltd. B-Tech AV Mounts and the B-Tech logo are registered trade marks. All other brands and product names are trademarks of their respective owners.