Symbols - liniLED Top Power Colour Manual

Symbols

Manufacturer's declaration that the product meets the applicable EC directives.
Suitable for mounting on all surfaces and suitable to cover with insulating material.
F
Passed glow wire test at 850 degrees Celsius. Global European regulations specify 650 degrees Celsius by default.
GLOW WIRE
850 °C
Restriction of Hazardous Substances (RoHS): product complies with the RoHS directive and each homogeneous material does not exceed
the limits for the materials mentioned under the RoHS directive (Pb, Hg, Cd, Cr6+, PBB and PBDE).
RoHS
This product can be both IP40 and IP68 depending on the con guration and application. See the documentation for the exact IP rating.
IP40/IP68 IP40/IP68
Protected against impact energy of 5 joules.
IK08 IK08
R
Bending of the LED strip is possible with a radius of ≥ 30 millimetres in the speci ed direction.
30 mm
BEND RADIUS
24 24
Operating voltage of 24 V DC.
V DC
Electrical appliance class III: this product is designed to be supplied from an extra-low voltage (≤ 60.0 V DC or ≤ 42.4 V AC).
Product is resistant against ultraviolet (UV) light or sunlight. Non-UV resistant products can degrade or discolour fast when exposed to UV light.
UV
Product can be cleaned with normal cleaning agents.
CLEANING
This product can be stored and used below 0 degrees Celsius. Verify the minimum storage and operating temperature in the datasheet or manual
for the lowest temperature allowed.
FROST
This product can be applied in seawater and its environment. Elements in seawater will have no harmful e ect on the product.
For chemical speci cations of these elements see the liniLED® material sheet. Verify the IP rating for proper use.
SEA
This product can be applied inside swimming pool environments. Elements in the air will have no harmful e ect on the product.
For chemical speci cations of these elements see the liniLED® material sheet. Verify IP rating for proper use.
SWIMMING POOL
ENVIRONMENT
This product is available on request and can be applied submerged in swimming pools and their environment. Disinfectants will have
no harmful e ect on the product. For chemical speci cations of these elements see the liniLED® material sheet. Verify IP rating for proper use.
SWIMMING POOL
SUBMERSIBLE
CRI
80 The CRI value of this product is 80 or higher.
+
3
MAC
The binning tolerance of this product is 3 MacAdam.
ADAM
S D C M
This product needs to be disposed of separately from normal household waste so it can be recycled. Verify the IP rating for proper use.
5 5
System guarantee of 5 years when the complete system consist of liniLED® products with the 5 years system warranty logo.
Terms & conditions apply.
System
18 LED strip manual | liniLED® Top Power Colour