COAXIAL
Use a digital coaxial cable (not included) to connect your TV or other audio
source device to the soundbar. Plug one end of a digital coaxial cable into the
COAXIAL connector on the soundbar, then plug the other end into the coaxial
output on your TV or other audio source device.
Notes:
You can use either the OPTICAL input or the COAXIAL input, but not
•
both at the same time.
The COAXIAL input does not fully support Dolby Atmos®. For Dolby
•
Atmos playback, use one of the HDMI® inputs.
The soundbar is not capable of decoding all digital audio formats. If an
•
unsupported format is detected, the audio will be muted. Ensure that
the audio format of the input source device is set to Dolby Digital™ or
PCM.
19