Table of Contents
Advertisement
6.4 Use the COAXIAL Socket
•
You also can use the COAXIAL cable (not
included) to connect the TV's COAXIAL OUT
socket and COAXIAL socket on the unit.
HDMI OUT
(eARC/ARC)
Tip: The unit may not be able to decode all
HDMI OUT
digital audio formats from the input source.
(eARC/ARC)
In this case, the unit will mute. This is NOT a
defect. Ensure that the audio setting of the
input source (e.g. TV, game console, DVD
player, etc.) is set to PCM or Dolby Digital
(Refer to the user manual of the input source
HDMI IN 1 HDMI IN 2
device for its audio setting details) with HDMI
/ OPTICAl / COAXIAL input.
6.5 Use the AUX Socket
A.
Use a RCA to 3.5mm audio cable (not
included) to connect the TV's audio output
sockets to the AUX socket on the unit.
HDMI OUT
(eARC/ARC)
A
B.
Use a 3.5mm to 3.5mm audio cable (included)
to connect the TV's or external audio device
headphone socket to the AUX socket on the unit.
6.6 Connect Power
Risk of product damage!
•
the power supply voltage corresponds to the
voltage printed on the back or the underside
A
of the unit.
•
Before connecting the AC power cord, ensure
you have completed all other connections.
•
Soundbar
Connect the mains cable to the AC~ Socket of
the main unit and then into a mains socket.
HDMI OUT
HDMI
eARC/ARC
HDMI IN
or
HDMI OUT
HDMI
eARC/ARC
B
Ensure that
B
7. Basic Operation
7.1 Standby/ON
When you first connect the main unit to the mains
socket, the main unit will be in Standby mode.
•
Press the
button on the unit or on the
remote control to switch the unit ON.
•
Press the
button again to switch the unit
back to STANDBY mode.
•
Disconnect the mains plug from the mains
socket if you want to switch the unit OFF
completely.
-
If a TV or an external device is connected, the
unit will switch on automatically when the
TV or the external device is switched on.
7.2 Automatic Power Off Function
The unit automatically turns to Standby mode
after about 15 minutes if the TV or the external
unit is disconnected, switched off or the volume is
too close to mute.
•
To switch the unit off completely, remove the
mains plug from the mains socket.
•
Please turn the unit off completely to save
energy when not in use.
7.3 Select Modes
Press the
(SOURCE) button on the unit or the
AUX, BT, OPT/COA, HDMI 1/2, HDMI eARC and
USB and buttons on the remote control to select
the desired mode. The selected mode will show
on the display.
7.4 Adjust the Bass/Treble Level
•
Press the BASS +/- buttons on the remote
control to adjust bass level.
Press the TREBLE +/- buttons on the remote
•
control to adjust bass level.
7.5 Turn the Surround Sound ON/OFF
Press the VERTICAL/SURROUND button on
•
the remote control to turn on the surround
sound. Press this button again to turn off the
surround sound.
7.6 Select Equalizer (EQ) Effect
Press the VOICE / SPORT / MOVIE / MUSIC
buttons on the remote control to select your
desired preset equalizer effects.
11
Advertisement
Table of Contents
