Table of Contents
Advertisement
using the Bluetooth® (BT) or USB input. Momentarily press the
button to pause or resume playback when using the Bluetooth (BT) or
USB input. Press and hold the
Bluetooth® pairing mode or to disconnect an existing paired Bluetooth
device.
4.
BASS: Press the ╋ button to increase the bass response or press ━ the
button decrease the bass response.
5.
TREBLE: Press the ╋ button to increase the treble response or press ━
the button decrease the treble response.
6.
╋/━/
system or press the ━ button to decrease the volume level of the
system. Press the
mute on or off. If audio is muted, increasing or decreasing the volume
level toggles mute off.
7.
VERTICAL SURROUND: Turns the Atmos® height speakers on or off.
8.
EQ: These rocker buttons select one of the four DSP sound modes.
9.
DIMMER: Adjusts the display brightness.
INSTALLATION
Safety Warning
Mounting the soundbar to the wall should be performed by qualified personnel
only. Incorrect installation can result in severe personal injury or property
damage. Care must be taken to avoid damage to any electrical wiring or
plumbing inside the walls. It is the installer's responsibility to ensure that the wall
can safely support the weight of the soundbar and wall mount brackets. Use a
stud finder as necessary to find the studs on a wood stud drywall wall. Additional
tools (not included) are required to install this speaker system.
: Press the ╋ button to increase the volume level of the
icon in the center of the button to toggle audio
button for about 1 second to enter
11
Advertisement
Table of Contents
