Advertisement
Advertisement
Table of Contents
Related Manuals for Monoprice PID 11411
Summary of Contents for Monoprice PID 11411
-
Page 2: Safety Warnings And Guidelines
MONOPRICE 11411/11412 User's Manual SAFETY WARNINGS AND GUIDELINES Please read this manual thoroughly prior to using this device. Pay particular attention to these Safety Warnings and Guidelines. Keep this manual in a safe place for future reference. • Do not expose this device to water or moisture of any kind. Do not place drinks or other containers with liquid on or near the device. -
Page 3: Package Contents
Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement. 1x Bluetooth home speaker system 1x AC power adapter (15 VDC, 3A) 1x 3.5mm audio patch cable... -
Page 4: Controls And Connections
MONOPRICE 11411/11412 User's Manual CONTROLS AND CONNECTIONS... - Page 5 MONOPRICE 11411/11412 User's Manual 1. DC IN Plug the power adaptor into the DC IN socket on the rear panel. 2. ON/OFF Button This button applies and removes power to the speaker system. When power is applied, the system goes into Standby mode.
- Page 6 MONOPRICE 11411/11412 User's Manual 9. Next Button Press this button to skip forwards to the next track in the playlist. This button has no effect when the Auxiliary input is in use. 10. Previous Button Press this button to skip back to the beginning of the current track. If already at the beginning, it will skip back to the beginning of the previous track in the playlist.
-
Page 7: Remote Control
MONOPRICE 11411/11412 User's Manual REMOTE CONTROL 15. Power ON/OFF Press this button to turn the unit on or to put it into Standby mode. 16. Bluetooth pairing Press and hold this button for about 3 seconds to delete the current pairing, allowing the speaker system to be paired to a different device. -
Page 8: Initial Setup
MONOPRICE 11411/11412 User's Manual 20. Play/Pause • Press this button to start or pause playback from your Bluetooth equipped device. This button has no effect if the Auxiliary input is in use. • Press and hold this button for about 1 second to delete the current pairing, allowing the speaker system to be paired to a different device. -
Page 9: Nfc Pairing
MONOPRICE 11411/11412 User's Manual NFC PAIRING If your Bluetooth device is equipped with NFC, you can pair it to the speaker system automatically by performing the following steps: 1. Check the BT/Aux indicator on the front panel. If it is flashing Blue, the system is ready for pairing. -
Page 10: Wall Mounting
If you are uncertain about the construction of your wall, what mounting hardware to use, or the steps necessary to mount the bracket to a wall, consult a professional equipment installer for assistance. Monoprice is not responsible for injury or damage caused by improper mounting or use of this product. -
Page 11: Specifications
MONOPRICE 11411/11412 User's Manual SPECIFICATIONS Full Range Amplifier: 10 watts x 2 channels Bass Amplifier: 20 watts Full Range Driver Type: 2" coated paper cone Woofer Driver Type: 3" fiber reinforced paper cone with rubber surround Frequency Response: 70 Hz ~ 20 kHz (+/- 3dB) Signal to Noise Ratio: 70dB Bluetooth Version: v4.0 with NFC... -
Page 12: Fcc Information
MONOPRICE 11411/11412 User's Manual FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.