Table of Contents
Advertisement
OPTICAL
Use a digital optical S/PDIF cable (not included) to connect your TV or other
audio source device to the soundbar. First, remove the protective plug from the
OPTICAL connector on the soundbar. Put it in a safe place for later use. Plug one
end of an optical cable into the OPTICAL connector on the soundbar, then plug
the other end into the optical output on your TV or other audio source device.
Notes:
You can use either the OPTICAL input or the COAXIAL input, but not
•
both at the same time.
The OPTICAL input does not fully support Dolby Atmos®. For Dolby
•
Atmos playback, use one of the HDMI® inputs.
The soundbar is not capable of decoding all digital audio formats. If an
•
unsupported format is detected, the audio will be muted. Ensure that
the audio format of the input source device is set to Dolby Digital™ or
PCM.
18
Advertisement
Table of Contents
