JUKI PS-800-6045 Instruction Manual page 41

Classifi-
cation of No. Parameter name
parameters
Speed P18 Button sewing speed 2
after the button is pressed
parameter
(mm/min)
P19 Button sewing speed 3
after the button is pressed
(mm/min)
P174 Machine head 2 speed
(mm/s)
P175 Machine head 3 speed
(mm/s)
Continuous inching speed
P178
P773 Number of revolutions in
the reverse direction (r/
min)
P774 Number of stitches to be
sewn at a limited speed at
the end of sewing
P775 Limited sewing speed to
be employed at the end of
sewing
Clamp
P22 Prohibition of sewing
during lifting of the clamp
setting
P25 Thread clamp starting
angle at the beginning of
sewing
P26 Thread clamp ending angle
at the beginning of sewing
P27 Thread clamp starting an-
gle during thread trimming
P28 Thread clamp ending angle
during thread trimming
P781 Whether or not the clamp
is required during travel
Clamp lowering at the time
P743
of resetting
Clamp lifting after the man-
P744
ual resetting.
Bobbin P29 Bobbin winder status
winder
setting
P30 Winding speed (r/min)
(limited to
the 6045
P31 Bobbin winding time setting
model)
(s)
Standard
Range
value
100 to 20000 8000
100 to 20000 1000
0 to 2000 0
0 to 2000 0
Reduce / mini- Reduce
mum / standard
0 to 3000 0
0 to 30 0
100 to 1800 0
Yes/No Yes
1 to 990 300
1 to 990 300
1 to 990 10
1 to 990 170
Yes/No Yes
0 to 10000 ms 0
0 to 10000 ms 0
Allowed / pro- Allowed
hibited
100 to 4500 2200
1 to 63000 200
– 39 –
Meaning of parameter and comment
Eight direction keys are supported
Operation speed using
Eight direction keys are supported
Operation speed using
XY axis speed in the case of using a
laser knife, etc.
XY axis speed in the case of using a
laser knife, etc.
Travel speed during pattern creation
Reverse feed stitching speed
Setting of the number of stitch from
which the sewing speed is limited at
the end of sewing a pattern
This parameter is used in combination
with P774 to obtain the specific limited
speed value.
Prohibition of sewing during lifting of
the cassette clamp
Thread clamp ON angle at the begin-
ning of sewing
Thread clamp OFF angle at the begin-
ning of sewing
Thread clamp starting angle during
thread trimming
Thread clamp ending angle during
thread trimming
Bobbin winder
Default state
Bobbin winding speed setting
Time setting of bobbin winding setting
icon
icon