JUKI PS-800-6045 Instruction Manual page 40

Classifi-
cation of No. Parameter name
parameters
Automatic P172 Intermediate presser is
reset after the completion
machining
of operation
P248 Whether or not the shaft
travel is required before
setting a reference
Clamp opening error at the
P252
time of setting a reference
P794 Output IO 1 at the end of
operation
P796
P795 Output IO 2 at the end of
operation
P797
Startup P8 First stitch startup speed (r/
min)
speed
P9 Second stitch startup
speed (r/min)
P10 Third stitch startup speed
(r/min)
P11 4th stitch startup speed
(r/min)
P12 5th stitch startup speed
(r/min)
P170 Number of revolutions of
the reverse feed stitching (r/
min)
P13 Whether or not the soft
start is required
P162 Whether or not the soft
start is required for the sec-
ond stitch at the beginning
of sewing
P163 Whether or not the sewing
speed reduction is required
for two stitches at the end
of sewing
Speed P14 Maximum number of revo-
lutions of the main shaft (r/
parameter
min)
P15 Jump speed (mm/min)
P16 Inching speed of the feed
(mm/min)
P160 Trial stitching speed (mm/
min)
P17 Button sewing speed 1
after the button is pressed
(mm/min)
Standard
Range
value
Yes/No Yes
Yes/No Yes
Yes/No No
OUT1 to OUT12 Low
High level / Low
level
OUT1 to OUT12 Low
High level / Low
level
100 to 3000 400
100 to 3000 600
100 to 3000 900
100 to 3000 1500
100 to 3000 2100
100 to 3000 1000
Yes/No Yes
Yes/No No
Yes/No No
100 to 4500 3000
100 to 100000 35000
100 to 20000 5000
100 to 60000 8000
100 to 20000 500
– 38 –
Meaning of parameter and comment
Intermediate presser motor is reset at
the end of sewing
First stitch sewing speed (Adjust this
speed as needed basis)
Second stitch sewing speed
Third stitch sewing speed
4th stitch sewing speed
5th stitch sewing speed
Reverse feed stitching speed
Whether the machine is started at a
low speed
Whether the second stitch is sewn at a
low speed
Low speed: Indicates that the constant
number has increased. The aforemen-
tioned acceleration setting is disabled.
Two stitches at the end of sewing are
sewn at a low speed
Maximum number of revolutions of the
main shaft
This setting defines the maximum
operating speed of rotation on the main
interface of machining.
Jump speed
Traveling speed of the feeding frame of
the feed unit during the regular stitching
Traveling speed employed during read-
ing, correcting and creating a pattern
Demonstration speed
Eight direction keys support the case of
manual movement of the box or collec-
tion of files
Operation speed using icon