Setting The Water Hardness Level - Miele PG 8582 Operating Instructions Manual

Water softener
28

Setting the water hardness level

Water hardness can be set between 0 and 12.6 mmol/l (0 - 70 °dH).
Open the menu as follows:

 button
 Further settings
Water hardness

The bottom line of the display shows the possible input range.
Water hardness input values can be found in the chart on the next
page.
Where the water hardness fluctuates, e.g. between 1.4 - 3.1 mmol/l
(8 - 17 °dH), always programme the machine to the higher value,
3.1 mmol/l (17 °dH) in this example.
Set the water hardness level using the arrow buttons

( = higher and  = lower).
Press OK to save the setting.

Water hardness
19 °dH
(0 - 70 °dH )