Dos Modules; Connecting Dos Modules - Miele PG 8582 Operating Instructions Manual

Connecting DOS
modules
Adding and dispensing chemical agents

DOS modules

Machines with a dispenser for powder detergent  in the door can
be retrofitted with up to 2 additional external dispensing modules
(DOS modules) for liquid process chemicals.
In the case of the version with an internal dispensing system for liquid
cleaning agent, an additional external dispensing module for liquid
process chemicals can be connected.
External dispensing modules are fitted by the Miele Customer Service
Department. Internal dispensing systems cannot be retrospectively
fitted.
DOS modules are supplied with their own installation instructions.
 Before fitting the DOS module, compare the connection data
(voltage and frequency) on the data plate with that on the data
plate of your machine. If the data does not match, the modules
could sustain damage. If in any doubt, consult an electrician.
2 DOS module connections
Power supply for DOS 1,

cleaning agent.
Power supply for DOS 5.

Connections for dispenser

hoses.
Connect the module to the electricity supply.

To connect the dispensing hose, release the hose clip on a free

connector and remove the safety cap.
Push the dispensing hose onto the connector and secure it with a

hose clip.
Unused connectors must be blanked off with safety caps to
prevent the leakage of wash fluid.
1 DOS module connection
Power supply for DOS 5.

Connection for dispenser

hose.
53