Charger And Battery; Cb70 And Bt27Ik Specifications; Setting Up The Cb70 Battery Charger - Danfoss IK3 User Manual

User Manual
Remote Control IK3 Transmitters

Charger and battery

Charger and battery

CB70 and BT27IK specifications

Setting up the CB70 battery charger

12 | © Danfoss | May 2021
Disposal note:
This symbol on the product indicates that it may not be disposed of as household waste.
It must be handed over to the applicable take-back scheme for the recycling of electrical equipment.
•
Dispose of the product through channels provided for this purpose.
•
Comply with all local and currently applicable laws and regulations.
CB70 battery charger
Specification
Standard AC power supply
Optional AC power supply
DC power supply
BT27IK battery
Specification
Voltage
Capacity
Charging temperature
Discharge temperature
Autonomy
Charging mode
Weight
Use the information below to properly set up the CB70 batter charger.
The battery charger has two charging compartments that can simultaneously charge two batteries.
1. Connect the charger to a power source using the cable supplied.
The red LED will switch.
Value
230 Vca ± 10%, 50
115 Vca, 60 Hz
From 10.5 V to 35 V
Value
4.8 V
2700 mAh NiMH
From 0° C to 45° C
From -20° C to 50° C
From 8 to 15 h (configuration dependant)
7h and intelligent
156.3 g
BC290857689420en-000201