Troubleshooting Table; Problems With Operation - Hanseatic HGTI4582C10J7710DS User Manual

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
Only authorised specialists may repair
the dishwasher. If in doubt, contact our
service department (see page EN-38).
Only carry out the actions which are de-
scribed in this user manual.
Never repair defective dishwashers – or
dishwashers which you presume to be
defective – yourself. You can endanger
yourself and subsequent users.

Problems with operation

Problem Possible cause
The dishwasher can- The mains plug has not
not be switched on. been inserted into a socket.
There is no voltage being
supplied through the socket.
The selected dish- The dishwasher's door is
washing not closed properly.
programme will not
The water tap has not been
start or it stops.
turned on properly.
The inlet hose is defective.
There is a risk of overflowing.
The electrical water stop
system has been activated.
Troubleshooting table
NOTICE
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
If water overfl ows, switch off the water
supply immediately and then contact
the service team (see page EN-38).
If the water has overfl owed, remove
any water standing in the dishwasher
before restarting a dishwashing pro-
gramme.
Solution
Insert the mains plug into the socket.
Check the fuse. Check the socket by
connecting another device.
Close the dishwasher door.
Turn the water tap on completely.
Contact our service team (see
page EN-38).
Page EN-35