(c)
3. Affix the condensation protection film
supplied (c) to the underside of the work-
top. In this way, you will avoid damage to
the work surface as a result of hot steam
which may be emitted from the dishwash-
er if the dishwasher door is left open.
4. Place the dishwasher in the desired position.
5. In order to compensate for uneven floor
surfaces and set up the dishwasher on a
level horizontal base, you can screw the
four adjustable feet (31) in or out.
The adjustable feet have slots around
their circumference. Insert a screwdriver
and turn the adjustable foot.
Use a spirit level to set up the dishwasher.
Set-up, connection and initial start-up
Degree of water hardness
Determine water hardness
In order to determine the water hardness in
your place of residence, you can
– look on the website of your water provider.
– telephone your water supplier.
– purchase suitable test strips at the
pharmacy.
Water hardness in
your household in
°dH
0–5
6–11
12–17
18–22
23–34
35–45
1. Obtain the appropriate setting from the
table above.
(31)
2. Close the dishwasher door.
(18)
3. If the dishwasher is switched on, switch it
off with the button
Page EN-33
Water hardness in
the dishwasher
H1
H2
H3
H4
H5
H6
(18).