(c)
3. Affix the condensation protection film sup-
plied (c) to the underside of the worktop.
In this way, you will avoid damage to the
work surface as a result of hot steam
which may be emitted from the dishwash-
er if the dishwasher door is left open.
4. Place the dishwasher in the desired position.
5. In order to compensate for uneven floor
surfaces and set up the dishwasher on a
level horizontal base, you can screw the
four adjustable feet (31) in or out.
The adjustable feet have slots around
their circumference. Insert a screwdriver
and turn the adjustable foot.
Use a spirit level to set up the dishwasher.
Installation, connection and initial commissioning
Degree of water hardness
Determine water hardness
In order to determine the water hardness in
your place of residence, you can
– look on the website of your water provider.
– telephone your water supplier.
– purchase suitable test strips at the
1. Obtain the appropriate setting from the
2. Close the dishwasher door.
(31)
3. If the dishwasher is switched on, switch it
pharmacy.
Water hardness in
Water hardness in
your household in
°dH
0-5
6-11
12-17
18-22
23-34
35-45
table above.
(18)
off with the
(18) button.
Page EN-33
the dishwasher
H1
H2
H3
H4
H5
H6