Safety Information For Handling - Melec ADB-2F45U Instruction Manual

１－２．Safety Information for Handling
●Overall:
●When setting up the STEP ANGLE SELECT switch:
●When setting up the HOLD CURRENT SELECT switch:
●When setting up the DRIVE CURRENT SELECT switch:

Do not touch the driver during operation
or immediately after stopping.
it may cause burn on the skin due to
overheating of the driver.

Erroneous setting may cause breakage of
the machine or injury due to unexpected
rotation of the motor.
Ensure correct setting.

A high setting value may cause burn on the
skin due to overheating of the motor.
Do not select a high value beyond the
required.

Erroneous setting may cause burn on the
skin, injury or damage to the motor due to
overheating of the motor.
Ensure correct setting.
-7-
ADB-2F45U
Instructions Manual