Watchguard AP325 Hardware Manual page 11

LED Status
Solid
Green
Third Off
Radio
Solid
(WIPS)
Green
Device Indicators in AP Firmware 8.8.0 and Lower
LED Status
Power Solid Green
Off
LAN1 / PoE Solid Green
Fast Flash Green
Slow Flash Green
Intermittent Flash Green
Off
LAN2 Solid Green
Flashing Green
Off
2.4 GHz Solid Green
Intermittent Flash Green
5 GHz Solid Green
Intermittent Flash Green
Third Radio Intermittent Flash Green
WatchGuard Technologies, Inc.
Description
8.8.2 and higher: SSID enabled on radio.
8.8.1: Wireless radio is active.
Wireless radio is inactive.
WIPS scanning is active (Wi-Fi Cloud mode only).
Description
Power on
Power off
Device connected to LAN1 port at 10/100/1000 Mbps.
Did not receive valid IP address from DHCP.
Cannot connect to WatchGuard Wi-Fi Cloud.
Activity on LAN1 port.
No Ethernet link.
Device connected to LAN2 port at 10/100/1000 Mbps.
Activity on LAN2 port.
No Ethernet link.
Client connected to 2.4 GHz radio.
Activity on 2.4 GHz radio.
Client connected to 5 GHz radio.
Activity on 5 GHz radio.
WIPS scanning activity on third radio.
WatchGuard AP325 Hardware Guide
7