Watchguard AP325 Hardware Manual page 10

WatchGuard AP325 Hardware Guide
The AP325 operates in AP combo mode where the 2.4 GHz and 5 GHz radios work in AP mode to
broadcast Wi-Fi, while the third radio operates in WIPS (Wireless Intrusion Prevention System) sensor
mode (Wi-Fi Cloud management only).
Device Indicators in AP Firmware 8.8.1 and Higher
LED Status
Power Off
Solid
Green
Flashing
Green
Flashing
Amber
LAN1 Off
(PoE)
Solid
Green
LAN2 Off
Solid
Green
(Wi-Fi
Cloud
mode)
Solid
Green
(Local
mode)
2.4 Off
GHz
and
5 GHz
radios
6
Description
Powered off.
Powered on.
AP cannot connect to Wi-Fi Cloud or the Gateway Wireless Controller.
AP did not receive an IP address from the DHCP server.
No Ethernet link.
Network interface is up and connected at 10/100/1000 Mbps.
No Ethernet link.
8.8.2 and higher: For APs with additional LAN ports, interface will be green if the
interface is up and a wired extension or link aggregation is enabled on the
interface in Wi-Fi Cloud.
8.8.1: Network interface is up and connected at 10/100/1000 Mbps.
Network interface is up and connected at 10/100/1000 Mbps.
8.8.2 and higher: No SSID enabled on the radio.
8.8.1: Wireless radio is inactive.
WatchGuard Technologies, Inc.