Download Print this page
Dorma 8916 JT Manual
Dorma 8916 JT Manual

Dorma 8916 JT Manual

Jamb track installation pull side mount and accessory plate bp89

Advertisement

Quick Links

8916/8956 JT, JTH
JAMB TRACK INSTALLATION PULL SIDE MOUNT
AND ACCESSORY PLATE BP89
1
(REFERENCE UNIT CARTON FOR ACCESSORIES AND
OPTIONS SUPPLIED)
Determine hand of door. Prepare door and frame
according to appropriate template.
RIGHT HAND
REVERSE BEVEL
LEFT HAND DOOR
CAUTION: SEX NUTS ARE REQUIRED FOR ATTACHMENT
OF COMPONENTS TO UNREINFORCED DOORS AND TO
WOOD OR PLASTIC FACED COMPOSITE TYPE FIRE
DOORS, UNLESS AN ALTERNATIVE METHOD IS
IDENTIFIED IN THE INDIVIDUAL DOOR MANUFACTURER'S
LISTINGS.
BP89 Plate applications only. Attach plate to door
2
as shown. Arrow on plate to point toward arm
attachment.
(RH DOOR)
QTY
(4)
QTY
(4)
3
Attach closer to door or plate with sweep and
latch valves facing hinges.
C
HINGES
L
(RIGHT HAND DOOR)
METAL FRAMES
QTY
(4)
WOOD FRAMES
QTY
(4)
PLATE
QTY
(4)
www.dorma-usa.com
LEFT HAND
REVERSE BEVEL
RIGHT HAND DOOR
(LH DOOR)
METAL FRAME
WOOD FRAME
HINGESC
(LEFT HAND DOOR)
1-800-523-8483
4
Assemble track and attach to frame.
NOTE: OUTER TWO SCREWS PASS THROUGH END
BLOCKS.
(JT UNITS ONLY)
Insert slide shoe, rubber stop and end blocks
into track and attach track to frame.
END BLOCK
RUBBER STOP
C
L HINGE
(JTH UNITS ONLY)
Attach arm to slide shoe using screw supplied
and tighten securely. Insert slide shoe, rubber
stop, hold open mechanism, and end blocks into
track and attach track to frame.
NOTE: HOLD OPEN MECHANISM AND SLIDE SHOE MUST
BE INSTALLED WITH ARROWS POINTING AWAY
FROM THE DOOR HINGES. (ARROWS ARE
STAMPED ON SLIDE SHOE & HOLD OPEN
MECHANISM)
IMPORTANT :
HOLD OPEN MECHANISM
END BLOCK
RUBBER STOP
L
C
L HINGE
QTY
(1)
QTY
(2)
QTY
(2)
INSPK NO. 08280160 Rev.09/09
08280161
INS NO.
END BLOCK
SLIDE SHOE
C
L HINGE
END BLOCK
SLIDE SHOE
M6 HEX KEY
ARM TO SLIDE SHOE
(METAL)
(WOOD)
1 of 3
PAGE
Rev.
09/09

Advertisement

loading
Need help?

Need help?

Do you have a question about the 8916 JT and is the answer not in the manual?

Questions and answers

Summary of Contents for Dorma 8916 JT

  • Page 1 HINGES HINGESC L HINGE M6 HEX KEY (RIGHT HAND DOOR) (LEFT HAND DOOR) ARM TO SLIDE SHOE METAL FRAMES WOOD FRAMES (METAL) (WOOD) PLATE INSPK NO. 08280160 Rev.09/09 www.dorma-usa.com 1-800-523-8483 1 of 3 09/09 08280161 PAGE Rev. INS NO.
  • Page 2 Adjust spring tension, if required, using a 1/4" wrench. Install main arm NOTE: 8916 supplied with size 4 spring setting. 8956 supplied with size 6 setting. * Viewed from top of door CRITICAL Place wrench on bottom pinion. SPRING TENSION ADJUSTER * Viewed from top of door BARRIER-FREE OPENINGS -...
  • Page 3 Adjust sweep and latch valves. Closing time from 90° to 15° (sweep range) is generally adjusted to take a minimum of 3 seconds. Closing time from 15° to fully closed (latch range) should take a minimum of 1.5 seconds. SNAP VALVE ADJUSTMENT WRENCH INSIDE COVER Optional delayed action offers additional closing speed control when extra time is required to pass through...

This manual is also suitable for:

8916 jth8956 jt8956 jth