Resetting To Factory Settings; Saving Energy With Eco-Mode - Dell V313 User Manual

Resetting to factory settings

Resetting to factory default settings will delete all the printer settings you have previously selected.
Using the printer control panel menus
1
From the printer control panel, press
2
Press the arrow buttons to scroll to Defaults, and then press
3
Press the arrow buttons to scroll to Set Defaults, and then press
4
Press the arrow buttons to scroll to Use Factory, and then press
5
When prompted to set the initial settings of your printer, make your selections using the printer control panel
buttons.
Initial Setup Complete appears on the display.
Using a button combination (if you cannot read the current
language)
1
Turn off the printer.
Note: If you have set the Power Saver timeout in the Setup menu, then press and hold the
to turn off the printer.
2
From the printer control panel, press and hold
3
Release all three buttons.
4
When prompted to set the initial settings of your printer, make your selections using the printer control panel
buttons.
Initial Setup Complete appears on the display.

Saving energy with Eco-Mode

The Eco-Mode feature optimizes energy efficiency and saves money.
When Eco-Mode is enabled, the printer automatically switches to the following settings:
•
The printer display is dimmed.
•
The printer changes to Power Saver mode after ten minutes.
Notes:
•
If you are using Eco-Mode, then the Eco-Mode settings override any changes you may make to individual settings
that are part of Eco-Mode.
•
Eco-Mode is enabled by default.
To change the Eco-Mode setting:
1
From the printer control panel, press
2
Press the arrow buttons to scroll to Device Setup, and then press
.
.
Using the printer control panel buttons and menus
.
.
.
and , and then press
.
21
for three seconds
to turn the printer on.