24
D e l l ™ L a t i t u d e ™ X 2 0 0 M e d i a B a s e U s e r ' s G u i d e
Swapping External Drives While the
Computer Is Running
In Windows XP
Double-click the Unplug or Eject Hardware icon on the Windows
1
taskbar.
Click the drive you want to eject.
2
Remove the drive cable from the 1394 connector.
3
Connect the new drive by connecting the drive cable to the 1394
4
connector.
The operating system recognizes the new drive.
If necessary, enter your password to unlock your computer.
In Windows 2000
Double-click the Unplug or Eject Hardware icon on the Windows
1
taskbar.
Click the drive you want to eject and then click Stop.
2
Click OK, and wait until the drive you want to eject is cleared from the
3
list of devices in the Unplug or Eject Hardware window.
Click OK.
4
Remove the drive cable from the 1394 connector.
5
Connect the new drive by connecting the drive cable to the 1394
6
connector.
The operating system recognizes the new drive.