Swapping Devices While The Computer Is Running - Dell Latitude C640 User Manual

NOTICE: Insert devices before you dock and turn on the computer.
5. Insert the new device into the bay, and push it until you hear a click.
6. Turn on the computer.

Swapping Devices While the Computer Is Running

NOTICE: To prevent damage to the docking connector, do not remove or replace devices while the
computer is connected to a docking device.
In Microsoft® Windows® XP
1. Double-click the Unplug or Eject Hardware icon on the taskbar.
2. Click the device you want to eject.
3. Keep the display open, and tilt the computer back so that you can access the bottom of the computer.
4. Slide and hold the latch release, and pull the device out of the bay.
5. Insert the new device into the bay, and push it until you hear a click.
6. If necessary, enter your password to unlock your computer.
In Windows 2000
1. Double-click the Unplug or Eject Hardware icon on the taskbar.
2. Click the device you want to eject and then click Stop.
3.