Select (Under Subtest); Options (Under Subtest); Test Limits (Under Subtest); About (Under Subtest) - Dell Latitude CP Reference And Troubleshooting Manual

The Key-Help option displays a list of available key con-
trols. The Quit Menu option returns you to the previous
menu.

Select (Under Subtest)

Select in the Subtest menu allows you to select individual
subtests to tailor the testing process to your particular
needs. You can choose one or more subtests from the list.
When you choose Select, five options are displayed: All,
One, Clear All, Key-Help, and Quit Menu.
To select all the test groups, highlight All in the Select
menu and press <Enter>. To select an individual subtest,
either highlight the subtest and press the <Spacebar> or
highlight One and press <Enter>.
To reverse a subtest selection, highlight the subtest and
press the <Spacebar>. To clear all selected subtests, select
Clear All.
The Key-Help option displays a list of available key con-
trols. The Quit Menu option returns you to the previous
menu.

Options (Under Subtest)

The Options option in the Subtest menu functions in the
same manner as the Options option in the Main menu. For
information on that option, see "Options" found later in this
section.
4-6 Dell Latitude CP Reference and Troubleshooting Guide

Test Limits (Under Subtest)

The Test Limits option in the Subtest menu functions in
the same manner as the Test Limits option in the Main
menu. For information on that option, see "Test Limits" found
later in this section.

About (Under Subtest)

The About option in the Subtest menu displays information
about the highlighted subtest, such as its limits and parameters
and how to set them.

Key-Help (Under Subtest)

The Key-Help option in the Subtest menu displays a list of
available key controls.

Quit Menu (Under Subtest)

The Quit Menu option in the Subtest menu returns you to the
Main menu.

Options

Table 4-1 lists all possible values for each global parame-
ter of Options. A brief description of each parameter
follows the table. To select a parameter, press the up- or
down-arrow key. To change the values within fields, use
the left- or right-arrow key, the <Spacebar> key, or the
plus (+) and minus (–) keys. If the value within a field is
numeric, you can type in the number. (If you make a mis-
take, type in zeros until the field is filled with zeros and
then start again.)