Table 2-1. System Setup Navigation Keys - Dell Latitude CP Reference And Troubleshooting Manual

computer. Information on the screens is organized in five
boxed areas:
•
Title
The box at the top of all screens lists the page num-
ber, the system name, and the version number of the
basic input/output system (BIOS).
•
Options
The box on the left half of screens 1, 2, and 4 lists
options that define the installed hardware in your
computer and the power conservation and security
features for your computer.
Fields next to the options contain settings or values.
You can change those values that appear bright on
the screen. Options or values that you cannot change
(because they are determined or calculated by the
computer) appear less bright.
•
Help
The box on the upper-right half of screens 1, 2, and 4
displays help information for the option with a cur-
rently highlighted field.
•
Computer data
The box in the lower-right corner of screens 1, 2, and
4 displays information about your computer.
•
Key functions
The line of boxes across the bottom of all screens
lists keys and their functions within the System
Setup program.
Production Note!!!
2-2 Dell Latitude CP Reference and Troubleshooting Guide
Table 2-1 lists the keys you use to view or change infor-
mation on the System Setup screens and to exit the
program.

Table 2-1. System Setup Navigation Keys

Keys Action
Moves the cursor to the next
or
field or previous field.
Cycles through available set-
or
tings for an option.
Cycles through the System
P
Alt
Setup pages.
Exits the System Setup pro-
Esc
gram without rebooting the
Suspend
computer and returns the sys-
tem to its previous state. If you
changed options that do not
take effect immediately, the
changes are recorded but do
not take effect until you reboot
the computer.
Resets all values to their
F
Alt
defaults.