Silvercrest SED 3.7 B2 Operating Instructions Manual page 17

3) Loosen the two now visible screws. You can then take the housing
GB
apart.
IE
4) Snip the red and black cable that connects the circuit board with
the blue-jacketed battery. You can now remove the battery from
the appliance.
5) Dispose of the battery environmentally friendly. Observe the cur-
rently applicable regulations. In case of doubt, please
contact your waste disposal centre.
14
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the provisions of European
Directive 2002/96/EC.
Dispose of the appliance through an approved dispos-
al centre or at your community waste facility. Observe
the currently applicable regulations. In case of doubt,
please contact your waste disposal centre.
SED 3.7 B2