Enabling Hibernate Support - Dell Inspiron 2500 Solution Manual

Click Next when the Welcome to the Windows 2000 Setup Wizard
10
window appears.
11 When the Regional Settings window appears, select the settings for
your locale, and then click Next.
Enter your name and organization in the Personalize Your Software
12
window, and then click Next.
13 When prompted, enter the Windows product key, which is printed on
the Microsoft label on your computer. Then click Next.
When the Computer Name and Administrator Password window
14
appears, enter a name for your computer and a password, if desired.
Then click Next.
Enter the date and time in the Date and Time Settings window, and
15
then click Next.
Windows 2000 begins to install its components and configure the
computer.
When the Completing the Windows 2000 Setup Wizard window
16
appears, remove the CD from the drive, and then click Finish. The
computer automatically restarts.
NOTICE:
Make sure that you reinstall the Intel
driver before you reinstall any other drivers.

Enabling Hibernate Support

Click the Start button, point to Settings, and click Control Panel.
1
Double-click the Power Management icon.
1
Click the Hibernate tab.
2
Ensure that Enable hibernate support is selected, and click Apply.
3
4 Click OK to close Control Panel.
®
Chip Set Update Utility
S o l v i n g P r o b l e m s 65