Power Light - Dell OptiPlex GX50 User Manual

22
Ab o u t You r C o mp u t er
P o w e r B u t t o n F u n c t i o n s f o r M i c r o s o f t W i n d o w s N T
Action
Press power button
Hold power button for 6 seconds* Computer turns
*Pressing or holding the power button to shut down the computer may result in data loss. Use
the power button to shut down the computer only if the operating system is not responding.
If the computer does not turn off when you press the power button, the
computer may be hung. Press and hold the power button until the
computer turns off completely (this process may take several seconds). If
the computer is hung and the power button fails to function properly,
unplug the AC power cable from the computer, wait for the computer to
completely stop running, and plug in the AC power cable. If the computer
does not restart, press the power button to restart the computer.

Power Light

The power light illuminates in two colors and blinks or remains solid to
indicate different states (normal and nonnormal). The following are normal
lights:
• No light — computer is in the off state (S4, S5, or mechanical OFF)
• Steady green — normal operating state
• Blinking green — low-power state (S1 or S3)
Results
Computer Computer Turned Off
Turned On
Computer shuts Boots and computer turns
down on
Boots and computer turns
off on
®