Dell OptiPlex GX50 User Manual page 71

S m a l l M i n i -To w e r C o m p u t e r
5
4
1 expansion card
2 card-edge connector
3 expansion-card connector
4 retention arm
5
lever
If you are installing a new expansion card, remove the filler bracket for
6
an empty card-slot opening. Then continue with
If you are replacing an expansion card that is already installed in the
7
computer, remove the expansion card.
If necessary, disconnect any cables connected to the card. Grasp the
card by its top corners, and ease it out of its connector.
Prepare the expansion card for installation.
8
1
2
3
step 8.
In s ta l l i n g U p gr a d e s
69