Microprocessor - Dell OptiPlex GX50 User Manual

NOTE: Dell recommends
that only a technically
knowledgeable person
perform the following
procedure.
80
In s ta l l i n g Up g r a d es
D I M M R e m o v a l
1
1 Socket
2 Securing clips (2)

Microprocessor

CAUTION: To avoid the possibility of electric shock, turn off the
computer and any devices, disconnect them from their electrical
outlets, and then wait at least 5 seconds before you open the
computer cover. Also, before you upgrade the microprocessor, see
the other precautions in
Turn off the computer and devices, disconnect them from their
1
electrical outlets, wait 10 to 20 seconds, and then
cover.
CAUTION: The microprocessor and heat sink assembly can get
extremely hot. Be sure the assembly has had sufficient time to
cool before you touch it.
Disconnect the fan cable from the
2
On the small mini-tower computer, remove the airflow shroud as
3
shown in the following illustration.
2
"Safety Instructions."
open the computer
system board.