Dell OptiPlex GX50 User Manual page 108

106
In s ta l l i n g Up g r a d es
S m a l l M i n i -To w e r C o m p u t e r
1 Power cable
2 IDE cable
3 IDE1 connector
Check all connectors to be certain that they are properly cabled and
2
firmly seated.
NOTICE:
To avoid possible damage to the computer, you must match the
colored stripe on the hard drive data cable with pin 1 on the hard drive (IDE1)
connector and with the system board interface connector (IDE1).
To locate the IDE connector 1 (IDE1) on the system board, see
"System Board Components."
On the small desktop computer, replace the hard drive shroud by
3
inserting the two tabs on the bottom into the holes in the computer
and snapping the top into place.
Close the computer
4
their electrical outlets, and turn them on.
1
2
3
cover, reconnect your computer and devices to