Mouse Problems - Dell OptiPlex GX50 User Manual

Is the device working properly?
Yes. You need a new device cable.
assistance.
No. Go to step 5.
Turn off the computer and the device, swap the device with a
5
comparable working device, and then turn on the computer and the
device.
Is the device working properly?
Yes. You need a new device.
No. Contact Dell for technical assistance.

Mouse Problems

Basic Checks:
• Disconnect the cable from the computer and check the cable
connector for bent or broken pins. Check for damaged or frayed cables.
• If the cable is not damaged, make sure that it is firmly connected to
the computer.
• Reinstall the mouse driver for your operating system.
• Restart the computer.
If the problem still exists after you complete the basic checks, fill out the
Diagnostics Checklist as you perform the following steps:
If you are using a PS/2 mouse, enter system setup and make sure that
1
Mouse Port under the Integrated Devices option is set to On. Then
exit system setup properly to save the information, and reboot the
computer.
Is the device working properly?
Yes. The problem is resolved.
No. Go to step 2.
If you are using a PS/2 mouse, run the Mouse test in the Pointing
2
Devices device group in the
Did the tests complete successfully?
Yes. Go to step 3.
Contact Dell for technical
Contact Dell for technical assistance.
Dell Diagnostics.
169
S o lv ing Pr o ble m s