Floppy Drive Access Light; Hard Drive Access Light; Back View - Dell OptiPlex GX50 User Manual

See "Diagnostic Lights" for a description of nonnormal indications.

Floppy Drive Access Light

The floppy drive access light lights when the drive is reading data from, or
writing data to, a floppy disk. Wait until this light turns off before you
remove the floppy from the drive.

Hard Drive Access Light

The hard drive access light lights when the computer is reading data from,
or writing data to, the drive.

Back View

S m a l l Fo r m - Fa c t o r C o m p u t e r
1 Half-height PCI expansion-card slot
2 AC adapter
3 AC voltage switch
1 2 3
NOTE:
Your computer
can resume from the S3
state (suspend to RAM) in
several ways. Pressing the
power button always
works. Certain USB
devices also wake the
computer from S3, and
the action required varies
by device. Check your
device documentation for
details. Remote Wake Up
also creates an S3 wake
event if enabled in system
setup and in your
operating system.
Personal System/2 (PS/2)
wake events also vary
depending on your
operating system. For
example, PS/2 mice will
not wake from S3 in
Windows 98 SE but will
wake from S3 in Windows
2000 or Windows XP if
enabled in the operating
system (OS). PS/2
keyboards will always
wake the computer from
S3 in Windows 98 SE
and will wake from S3 in
Windows 2000 or
Windows XP if enabled in
the operating system.
Ab o u t Yo u r C o m p u te r
23