Memory - Dell OptiPlex GX50 User Manual

76
In s ta l l i n g Up g r a d es
E x p a n s i o n - C a r d C a g e R e p l a c e m e n t
1
1 Expansion-card cage
Make sure that the riser board is fully seated in the connector on the
2
system board.
Reconnect any cables that you removed in
3
procedure.

Memory

You can increase memory up to 512 MB by using synchronous dynamic
random-access memory (SDRAM) dual in-line memory modules (DIMMs).
The system board illustration shows the location of the DIMM sockets on
the system board (DIMMs must be non-error checking and correction [non-
ECC]).
When you add memory, you may install DIMMs in either socket. For
optimum operation, Dell recommends that you install a DIMM in socket A
first (closest to the processor) before installing a DIMM in socket B.
step 2 of the previous