LG 55EU960H Setup Manual page 93

Screen Share (Miracast / WiDi)
The following steps describe how to access and use the Miracast / WiDi features.
Note: This procedure describes how to access Screen Share from the TV's Smart Launcher. If the TV is
not in Pass-through Mode, it is also possible to access Screen Share from the TV's General Menu.
1. Turn ON the TV, and then press the
Launcher.
2. Use the Left/Right arrow keys on the Installer Remote to select Screen Share, and then press the Wheel
(OK) button.
Note: If Screen Share is not currently available in the Smart Launcher, you may need to exit/turn
off another Media Share feature in order to use Screen Share. For example, select Wi-Fi Service
(SoftAP) in the TV's Smart Launcher, and make sure that SoftAP is turned off. See also note on page
91 regarding simultaneous use of Media Share features.
3. Follow the on-screen instructions to initiate the Miracast / WiDi connection from your Miracast / WiDi
device. Note that you may be prompted to enter a PIN number that appears on the TV screen into your
Miracast / WiDi connection window to complete the connection.
Once the connection is established, the TV display may be used as a second screen for the Miracast /
WiDi device.
DIAL
The following steps describe how to access and use DIAL. Remember that the device used MUST be
connected to the same network as the TV.
Note: DIAL may only be used with device applications for which a TV-compatible application (for
example, YouTube) has been created/selected for inclusion in the Pre-loaded Apps Menu (see "Pre-loaded
Applications" on page 73).
1. Turn ON the TV, and then press the
Launcher.
2. Use the Left/Right arrow keys on the Installer Remote to select the desired application, and then press
the Wheel (OK) button.
3. On your device, launch the same application, and use the appropriate options (typically available via
Settings) to initiate a connection/pairing with the TV. You may also need to access the Settings options
from the application on the TV to complete the pairing operation. Follow the on-screen instructions.
Once the connection/pairing is successful, you will be able to view media from the application on the TV.
SoftAP
The following steps describe how to access and use the SoftAP feature.
Note: This procedure describes how to access SoftAP using the Wi-Fi Service option available from the
TV's Smart Launcher. It is also possible to access SoftAP from the TV's General Menu.
1. Turn ON the TV, and then press the
Launcher.
206-4334
Reference: Using Media Share Features (Cont.)
button on the Installer Remote to display the TV's Smart
button on the Installer Remote to display the TV's Smart
button on the Installer Remote to display the TV's Smart
(Continued on next page)
93