Pro:centric Java Application Setup - LG 55EU960H Setup Manual

Pro:Centric Java Application Setup

The Pro:Centric Java application operates in conjunction with FTG and PPV Modes. This section
provides an overview of the setup required for the Pro:Centric features. Administration and management
options for the Pro:Centric server are described in detail in the Pro:Centric Server Admin Client
User Guide. This document describes only those settings that must be specified on the TVs to enable
Pro:Centric remote management and/or the Pro:Centric Java application.
• Remote management (TV E-Z Installation): The Pro:Centric Admin Client provides remote
management facilities for downloading software/firmware updates as well as facilities for downloading
a Clone/Configuration (.tlx) file for FTG Mode configuration.
• Pro:Centric Java application: The application comprises the Pro:Centric interactive menus/features
described on page 11. Pro:Centric application settings are managed via the Pro:Centric Admin Client
for the Java application.
The Pro:Centric remote management facilities and application download are based on Installer Menu
item settings that are used to set up the TV's Pro:Centric features. The Installer Menu / Pro:Centric server
settings can be configured using one of the methods described below.
TV in Factory Default State
When the TV is in a factory default state, LG's First Use Wizard provides automated or manual options for
configuring the Pro:Centric server settings. See "First Use Wizard" on pages 16 to 17 for further information.
The First Use / EZ-Manager Wizard also provides a USB configuration option that enables you to configure
a TV for FTG Mode using a Clone/Configuration (.tlx) file stored on a USB memory device. The ".tlx" file
incorporates FTG Installer Menu settings, including Installer Menu items 098 PRO:CENTRIC and 119
DATA CHANNEL, which are used to set up the TV's Pro:Centric features.
Note: If Pro:Centric data delivery will be over IP, there is a Domain Name System (DNS) server at the
site, and you intend to use the EZ-Manager Wizard to set up the TV, you can create a "procentric.local"
DNS entry for the Pro:Centric server that will enable automated Pro:Centric IP configuration via the
EZ-Manager. If there is no DNS entry for procentric.local, you will need to manually enter the Pro:Centric
server IP address and port number during configuration.
TV in Pass-through Mode
If the First Use Wizard has been exited and the TV is in Pass-through Mode, either:
• Set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL to the appropriate values.
See Installer Menu information on pages 38 to 48 for further details. Also, as necessary, refer to
"Custom Master TV Setup" on pages 49 to 51 and/or cloning information on pages 52 to 58.
• Configure the appropriate Pro:Centric server settings in the IP Environment / Pro:Centric Menu. You
must use this option, in particular, if you wish to configure IP settings for the Pro:Centric server. See
"Accessing the IP Environment Menu" on page 65 and "Pro:Centric Setup" on pages 70 to 72 for further
information.
Note: When the TV is in either Pass-through Mode or FTG Mode, you can also leave Installer Menu item
119 DATA CHANNEL set to its default value (255) to enable the TV's Data Channel Auto Search feature to
set the DATA CHANNEL value. See item 119 description on page 47 for additional information.
206-4334
Pro:Centric Operation (Cont.)
13