Important Notes; Legal Bases; Subject To Changes; Personnel Qualification - WAGO 787-1200 Manual

Compact Power
787-1200 Power supply
2

Important Notes

This section includes an overall summary of the most important safety
requirements and notes that are mentioned in each individual section. To protect
your health and prevent damage to devices as well, it is imperative to read and
carefully follow the safety guidelines.
2.1

Legal Bases

2.1.1

Subject to Changes

WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any
alterations or modifications. WAGO Kontakttechnik GmbH & Co. KG owns all
rights arising from the granting of patents or from the legal protection of utility
patents. Third-party products are always mentioned without any reference to
patent rights. Thus, the existence of such rights cannot be excluded.
2.1.2

Personnel Qualification

All tasks performed on the 787 Series devices must only be completed by
qualified electrical specialists according to EN 50110-1/-2 and IEC 60364.
2.1.3 Use of the 787 Series in Compliance with Underlying
Provisions
The 787 Series power supply system provides DC voltage to electric or electronic
devices, such as industrial control systems or display, communication and
measuring devices.
The devices have been developed for use in an environment that meets the IP20
protection class criteria. Protection against finger injury and solid impurities up to
12.5 mm diameter is assured; protection against water damage is not ensured.
Unless otherwise specified, operation of the components in wet or dusty
environments is prohibited.
The devices are designed for installation in an enclosure. Under no
circumstances may they be used in control systems for planes or in nuclear
facilities, as any malfunction in these applications could result in severe injuries
or risk of death.
Important Notes 9
Manual
Version 1.0.0