Table of Contents
Advertisement
1. Select the appropriate weight stack label(s) according to your order. You can install pound
labels, kilogram labels, or both.
2. If you ordered a 170 lb. weight stack, use labels:
LBL-WSE-01170 (for pounds)
LBL-WSM-01170 (for kilograms).
3. If you ordered a 250 lb. weight stack, use labels:
LBL-WSE-01250 (for pounds)
LBL-WSM-01250 (for kilograms).
4. Remove the backing from the label to expose the adhesive. Carefully locate the label on the
shroud so that it is centered between the edge and the bend. Line up the numbers with their
corresponding weight plate. Once the correct position is attained and the label is a uniform
distance from the edge, press firmly along the entire length of the label.
5. NOTE: Adhesive takes 24 hours to fully set.
S
9: I
TEP
NSTALL THE
23
W
EIGHT
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
S
L
TACK
ABEL
INSTALL LABEL HERE
OR HERE
Advertisement
Table of Contents
