Dell Dimension 8100 Solution Manual page 37

Select Boot From Hard Drive, and then press <Enter>.
22
Enter a password in the Enter Network Password window, if desired,
23
and then click Next.
Remove the operating system CD from the CD or DVD drive.
24
Enter the system setup program as directed by a Dell technical support
25
representative.
In the system setup program Boot menu, change the boot sequence so
26
that the floppy drive boots first, as directed by a Dell technical support
representative. Then, exit the system setup program.
Insert the operating system CD into the CD or DVD drive.
1
Shut down the computer.
2
Start the computer.
3
Press any key when the Press any key to boot from CD message
4
appears on the screen.
When the Windows 2000 Setup screen appears, ensure that the To
5
setup Win2000 now, press ENTER option is highlighted. Then press
<Enter>.
Read the information in the License Agreement screen, and then press
6
<F8> to continue.
When the Windows 2000 Professional Setup screen appears, use the
7
arrow keys to select the Windows 2000 partition option that you want.
To continue, press the key specified in the partition option that you
chose.
When the Windows 2000 Professional Setup screen reappears, use
8
the arrow keys to select the type of filing system that you want
Windows 2000 to use, and then press <Enter>.
Press <Enter> again to restart your computer.
9
Click Next when the Welcome to the Windows 2000 Setup Wizard
10
screen appears.
When the Regional Settings screen appears, select the settings for
11
your locale, and then click Next.
Solving Pr oblems 37