Dell Dimension 8100 Solution Manual page 56

56
Adding Parts
Connect a DC power cable to the power input connector on the back
9
of the drive.
power input
connector
DC power cable
Make sure that all cables are firmly connected. Fold cables out of the
10
way to provide airflow for the fan and cooling vents.
If the computer drive bay was previously empty, remove the
11
corresponding insert from the front panel.
Hold the front panel with the outside facing you. Press the ends of the
insert with your thumbs until the insert snaps free of the front panel.
interface cable
secondary system board
EIDE connector
interface connector