24
Solving Pr oblems
R
E I N S T A L L T H E P R I N T E R D R I V E R
C
H E C K T H E P O W E R C A B L E C O N N E C T I O N
cable is firmly connected to a working electrical power source and that the
scanner is turned on.
C
H E C K T H E S C A N N E R C A B L E C O N N E C T I O N
cable is firmly connected to the computer and to the scanner.
U
N L O C K T H E S C A N N E R
locking tab or button.
R
E I N S T A L L T H E S C A N N E R D R I V E R
scanner documentation for instructions.
NOTICE:
Connect the modem to an analog telephone jack only. Connecting
the modem to a digital telephone network damages the modem.
C
H E C K T H E T E L E P H O N E J A C K
modem and connect it to a telephone. Listen for a dial tone.
C
O N N E C T T H E M O D E M D I R E C T L Y T O T H E T E L E P H O N E W A L L J A C K
you have other telephone devices sharing the line, such as an answering machine,
fax machine, surge protector, or line splitter, then bypass them and connect the
modem directly to the telephone wall jack with the telephone line.
C
H E C K T H E C O N N E C T I O N
the green jack on the modem. (The green line-in jack has either a LINE IN label
or a connector-shaped icon next to it.)
—
See page 13.
—
Ensure that the scanner power
—
Ensure that the scanner
—
Ensure that your scanner is unlocked if it has a
—
Reinstall the scanner driver. See the
—
Disconnect the telephone line from the
—
Verify that the telephone line is connected to
—
If