KDK M48WG Operating And Installation Instructions page 14

2
2
Loosen the screw from the Speed Regulator Cover. Open the Speed Regulator by lifting up the Speed Regulator Cover from the base.
鬆開調速器蓋子上的螺絲。從底部提起調速器蓋子以打開調速器。
Screw / 螺絲
3
3
Insert the live wire from the wall through the hole of the Speed Regulator Base as shown.
如圖所示將火線從牆壁通過調速器底部的孔插入。
4
Fix the Speed Regulator box to the wall by screwing the screws as shown.
如圖所示鎖緊螺絲以安裝調速器箱至牆壁。
Wood Screw / 木螺絲
Wood Screw and Wall Plug is not supplied.
木螺絲和壁式插座並不提供 。
Speed Regulator Base /
調速器基地
Switch /
開關
L
L
1
ATTENTION / 留意
Regulator Cover/
調節器蓋子
Terminal 1 / 端子 1
Live Wire /
火線
1
Live Wire / 火線
Wall Plug / 壁式插座
留意
14
1
L
Holes / 孔