Use for network connection
(i.e., for Pro:Centric data).
(3.5 mm jack) Connect external audio (fixed
speaker, variable speaker, or fixed line level
[amplifier]) equipment. See Reference section,
"External Stereo Speaker Setup," for further
OPTICAL DIGITAL AUDIO OUT
Use for amps and home theater
systems. Note: When the TV is
OFF, this port is not enabled.
RS-232C IN
(CONTROL & SERVICE)
When the TV is in Pass-through
Mode, the RS-232C control
function enables an external TLT
control device (i.e., VOD/PPV
STB, etc.) to control the TV.
Service for factory use only.
206-4339
Reference: LT560H Rear and Side Jack Panels
LAN
SPEAKER OUT
LINE OUT
information.
SPEAKER OUT
LINE OUT
OPTICAL
DIGITAL
AUDIO OUT
RS-232C IN (CONTROL&SERVICE)
SERVICE ONLY
SERVICE ONLY
Restricted to service updates.
Side Jack Panel
USB IN
Insert USB memory device
for software updates, cloning
purposes, FTG Mode via CPU
configuration, picture/music
entertainment, etc., as applicable.
HDMI IN 2 & 3
Connection for HDMI output
from external device.
HDMI IN 1
Connection for HDMI/DVI
output from external device.
MPI
When the TV is in Pass-through Mode, the MPI
function enables an external MPI control device
(i.e., VOD/PPV STB, etc.) to control the TV.
LAN
IN
1
MPI
L
R
L/MONO
-AUDIO-
R
VIDEO
AV IN / AUDIO IN
AV IN/AUDIO IN
Connect video/audio
output from external device.
Note: Placement of connector/port labels
varies slightly depending on model.
RESET
Initiates a hardware reset
and turns the TV OFF.
RESET
UPDATE
Restricted to software
updates.
ANTENNA /
ANTENNA/CABLE IN
CABLE IN
Connect to Antenna/
CATV.
67
Need help?
Do you have a question about the Pro:Centric 32LT560H and is the answer not in the manual?