Table of Contents
Advertisement
Chapter 13 System
Online Firmware
Find firmware at
www.zyxel.com
in a file that uses the version number and project code with a "*.bin"
extension, e.g., "V1.00(ABCS.0)C0.bin". The upload process uses HTTP (Hypertext Transfer Protocol) and
may take up to two minutes. After a successful upload, the system will reboot.
System Restart
System restart allows you to reboot the NBG7815 without turning the power off.
Reset to Factory Default
Click the RESET TO FACTORY DEFAULT button in this section to clear all user-entered configuration
information and returns the NBG7815 to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your NBG7815.
Click Settings > System > Maintenance to show the following screen.
Figure 82 Settings > System > Maintenance
13.7 Operating Mode Screen
Use this screen to select how you want to use your NBG7815.
The Operating Mode function lets you configure your NBG7815 as a router or bridge. You can choose
between Standard Mode, and Bridge Mode depending on your network topology and the features you
require from your device.
The following describes the device modes available in your NBG7815.
NBG7815 User's Guide
140
Advertisement
Table of Contents
